Prior to commercialization, the development of new pharmaceuticals, particularly combination treatments, was a complicated process involving extensive research. When it comes to packing pharmaceuticals for patient use, several things must be considered to ensure that they satisfy the highest quality requirements and are safe to use.
Nowadays, the challenge of adopting traditional glass or specialized polymers as combination products has become common. Similarly, the demand for scientific evidence to support regulatory requirements for the pharmaceutical industry has also become more prevalent. For effective development and commercialization of a pharmaceutical product, it is important to understand the compatibility and performance of the primary packaging system with both, the pharmaceutical product and the delivery systems, regardless of the material.
Container Closure Integrity (CCI)
Container closure integrity (CCI) testing is important when ensuring the quality of all packaged products, especially when it comes to parenteral drugs. To evaluate the CCI of the packaging system, a pharmaceutical manufacturer must calculate the Maximum Allowable Leakage Limit (MALL) for the pharmaceutical product. MALL is defined by USP<1207> Package Integrity Evaluation – Sterile Products as the highest leak rate that may be tolerated for a specific packaging method while posing no harm to the safety and quality of the pharmaceutical product over its shelf life. In comparison to probabilistic approaches, USP <1207> provides guidelines on how to assess CCI, including deterministic methods, which are strongly encouraged. Helium leak detection, MicroCurrent HVLD, and Vacuum decay- are deterministic techniques. For the given system, these techniques must be created and validated.
MicroCurrent HVLD is a non-destructive technique for determining the integrity of container closures for a variety of parenteral liquid products, including ultra-low conductivity sterile water for injection (WFI). A non-conductive container is examined for pinholes, micro-cracks, plunger leakage, and non-visible crimping leaks, among other things, using an electrode probe. Whenever a defect is identified, it causes a change in current flow and resistance differential, which indicates a breach in the container. The MicroCurrent HVLD is a High Voltage Leak Detection method effective across all parenteral products.
Helium Leak Detection
Helium leak detection is a deterministic method used to detect leaks in pressure vessels and other enclosed systems. In this technique, helium is used as a tracer gas. The change in helium concentration as it escapes through the container is monitored. For helium-based leak detection systems, the Seal Integrity Monitoring System (SIMS) 1915+ is a perfect choice. Helium as a tracer gas delivers excellent levels of quantitative accuracy when compared to traditional vacuum bubble and dye penetration test techniques. Helium is an optimal solution for product quality monitoring across the product lifecycle.
A non-destructive CCI test method for evaluating medical device package integrity. Non-destructive testing improves package quality while decreasing waste when compared to destructive testing. This testing also saves time and money while ensuring product quality. This method operates by enclosing sample packages in a tight-fitting evacuation test chamber with an external vacuum source. A single or dual vacuum transducer is utilized in the test chamber to measure the level of vacuum as well as the change in vacuum over a pre-defined time period. The existence of leaks and defects is indicated by fluctuations in the package's absolute and differential vacuum.
Regardless of the pharmaceutical product, type of materials, devices used, developing a complete testing plan from initial compatibility to stability and release is critical. To assure the availability of scientific data that helps ensure optimal results for patients as well as rapid regulatory approval and delivery to the market, proper testing is required.